- HONDA 2008 Odyssey Automobile Owner's Manual

Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Remove the two screw covers on
the light assembly by prying on
the side edge with a flat-tip
screwdriver.
Remove the screws with a Phillips-
head screwdriver, then remove
the light assembly from the
tailgate.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Press the brake pedal to make
sure the new bulb is working.
Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Reinstall the high-mount brake
light assembly into the tailgate.
Tighten the two screws and
reinstall the covers.
1.
2.
3.
4.
5.
6.
7.
Lights
Replacing a High-mount Brake
Light Bulb
Maintenance
435
SCREWS
BULB
SOCKETCOVER
０７／０９／０３ ２１：０２：４７ ３１ＳＨＪ６３０ ０４４０