- HONDA 2008 Odyssey Automobile Owner's Manual

CONTINUED
Install the bracket and the bracket
mountingwingboltonthe
attachment point as shown, and
tighten the bolt. Make sure the
bracket is securely tightened.
Install the flat tire on the bracket
with the inside of the wheel facing
toward you. Install the tire
mounting wing bolt to the bracket
through one of the five wheel nut
holes as shown. Poke a hole in the
vinyl bag as needed. Secure the
flat tire by tightening the tire
mounting wing bolt.
Store the jack in its holder. To
store the jack, align the locator
stud in the holder with the hole in
the jack base. Turn the jack’s end
bracket clockwise to lock it in
place. Store the tools in the
holders on the back of the jack
storage cover.
Return the third row seat to an
upright position.
YouwillfindaU-shapedcarpet
piece behind the seat bottom of
the third row seat. Pull up the U-
shaped carpet piece, fold it, and
tack the end under the carpet.
Remove the spacer, and unfasten
the plastic screw with a coin.
20.
21.
22.
23.
24.
Changing a Flat Tire
Taking Care of the Unexpected
463
BRACKET
TIRE MOUNTING WING BOLT
SPACER
PLASTIC SCREW
BRACKET MOUNTING WING BOLT
ATTACHMENT
POINT
０７／０９／０３ ２１：０６：３４ ３１ＳＨＪ６３０ ０４６８