- HONDA 2008 Odyssey Automobile Owner's Manual

CONTINUED
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. For more
information, see page .
You will also see a ‘‘CHECK ABS
SYSTEM’’ message on the multi-
information display (see page ).
This indicator has two functions:
Itcomesonwhenyouturnthe
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you drive with the
parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tires.
You will also see a ‘‘RELEASE
PARKING BRAKE’’ message on the
multi-information display (see page
).
If it remains on after you have
fully released the parking brake
while the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page .
You will also see a ‘‘BRAKE FLUID
LOW’’ or ‘‘CHECK BRAKE
SYSTEM’’ message on the multi-
information display (see page ).
1.
2.
89
88
88
384
473
On Touring models
On Touring models
On Touring models
Instrument Panel Indicators
Anti-lock Brake System
(ABS) Indicator
Parking Brake and
Brake System
Indicator
Instruments and Controls
69
U.S. Canada
０７／０９／０３ ２０：１３：１６ ３１ＳＨＪ６３０ ００７４