Remote Starter User Manual

© 2008 American Honda Motor Co., Inc. - All Rights Reserved. AII 38216-38957 (0802) 11 of 21
37. Disconnect the vehicle 8-pin connector on the rear
of the wiper switch and plug the engine starter
harness 8-pin connector into the vehicle 8-pin
connector.
38. Secure the connected 8-pin connector with a wire
tie to the engine starter harness.
6D01101T
WIPER
SWITCH
VEHICLE 8-PIN
CONNECTOR
ENGINE STARTER
HARNESS
8-PIN CONNECTOR
6D01071T
WIRE TIE
CONNECTED 8-PIN
CONNECTOR
ENGINE
STARTER
HARNESS
WIPER
SWITCH
35. Route the engine starter harness 7-pin connectors
up the steering column and to the ignition switch.
Unplug the white vehicle 7-pin connector. Plug the
white engine starter harness 7-pin connectors into
the white vehicle 7-pin connectors.
6D01081T
ENGINE
STARTER
HARNESS
7-PIN
CONNECTOR
(white)
VEHICLE 7-PIN
CONNECTOR
(white)
IGNITION
SWITCH
6D01091T
Pull the connector
and check that it
is locked securely.
VEHICLE 7-PIN
CONNECTOR (brown)
(Not reconnected.)
ENGINE STARTER
HARNESS 7-PIN
CONNECTOR (brown)
36. Unplug the brown vehicle 7-pin connector, and
plug the brown engine starter harness 7-pin
connector into the brown vehicle 7-pin connector.
NOTICE Make sure that the engine starter harness
7-pin connector is connected to the vehicle connector
and it is locked securely. A loosely connected
connector can cause engine stall during driving.
www.collegehillshonda.com