Remote Starter User Manual

46. Secure the engine starter harness to the vehicle

harness using a wire tie.

• With driver's dashboard under cover: Secure

in the hole you made in the instrument panel.

• Without driver's dashboard under cover:

Secure through the existing hole for under

cover securing.

47. Use the clip on the engine starter harness to

secure the engine starter harness to the fuse box.

45. With driver's dashboard under cover: Measure

the indicated dimension on the instrument panel

and mark with a felt-tip pen and a center punch.

Drill a 3 mm hole and then a 7 mm hole at the

marked position of the instrument panel.

– Wear safety goggles during drilling.

– Using a file, remove the burrs at the edges

of the holes you made.

6D01351T

INSTRUMENT

PANEL

CENTER

PUNCH

FELT-TIP PEN

View from below

12 mm

(0.5 in.)

6 mm

(0.2 in.)

FRONT

6D01361T

INSTRUMENT PANEL

DRILL

DRILL BIT

(3 mm, 7 mm)

6D01172T

CLIP

FUSE

BOX

WIRE TIE

WITH DRIVER’S

DASHBOARD UNDER

COVER