- Honda Portable Generator Owner's Manual

AC applications :

1. Turn the voltage slector switch to either position as required. When the

switch is turned to “12OV ONLY” position, you can use only 12OV AC.

At “12OV/24OV” position, you can use both 12OV and 240V sources.

2. Switch on the AC Circuit Breaker.

3. Plug in the appliance.

NOTE: This gen&ator is equipped with an AVR (Automatic Voltage

Regulator) for stable voltage supply.

CAUTION: Be sure that appliances do not exceed the rated load for

more than 30 minutes, and never exceed the maximum load. Substan-

tial overloading will switch off the circuit breaker. Lesser overloading

will not switch off the circuit breaker’and will shorten the service life of

the generator.

VOLTAGE SELECTOR

AC CIRCUIT BREAKER

SWITCH