- Honda Tiller Owner's Manual

3. PRE-OPERATION CHECK
ENGINE OIL
1. Place the tiller on a level surface.
2. Remove the oil filler cap and wipe the dipstick clean.
3. Insert the dipstick into the oil filler neck, but do not screw it in.
4. If the level is low, fill to the top of the oil filler neck with the recommended
oil.
Running the engine with a low oil level will cause serious engine
damage.
Use 4-stroke motor oil that meets or exceeds the requirements for API service
classification SF or SG. Always check the API SERVICE label on the container
to be sure it includes the letters SF or SG.
Using nondetergent oil can shorten the engine’s service life, and using
P-stroke oil will damage the engine.
SAE 1 OW-30 is recommended for general use. Other viscosities shown in the
following chart may be used when the average temperature in your area is
within the indicated range.
ENGINE OIL hLLER
\
CAP/DIPSTICK
OIL FILLER NECK
UPPER
10
-30 -20 -10
0 Y) 20 30 4o.c
Ambient temperature