- Honda Tiller Owner's Manual

GEAR SELECTION

Return the throttle lever to the idle position and disengage the main clutch before

moving the gearshift lever. Avoid using excessive force on the gearshift lever.

Gearshift lever

Select a gear position in accordance with the contents of the Gear Selection

Table.

Gear Selection

Always operate the gearshift lever after the main clutch has been disen-

gaged.

If thegearshift lever isdiff icult to operate, squeeze the main clutch once and

then disengage the main clutch and operate the gearshift lever again.

In reverse operation, be especially careful of your feet and observe the

following precautions:

- Make sure there are no people or obstacles behind you.

- Lower the engine speed.

- Hold the handlebar with both hands and support it firmly.

- Gently engage the clutch and make sure that it can be disengaged at

any time.

GEARSHIFT LEVER

3ear Selection Table

(When enoine

soeed is 3,600 ram)

(

Gear position Tiller speed Tine speed Suitable work

0.35 m/s -

Moving tiller, loading tiller onto a truck,

taking tiller on or off field

2 1.22 m/s -

Moving tiller

TINES/WHEELS

ENGAGE

0.35 m/s

238 rpm

Tilling, ground breaking, weeding

0.36

m/s

Moving tiller, loading/unloading tiller from

a truck, taking tiller on or off field

* Tiller speed applies when standard tires are used.