- Honda Tiller Owner's Manual

TILLING WORK

Tilling deeply at first may cause the tiller to lurch forward suddenly.

If a stone or hard object hits against the tines while tilling, the

handlebar may lift up and the tiller may lurch forward suddenly;

caution must therefore be exercised.

When operating the tiller, always walk behind and in the center of the

tiller and hold the handlebar with both hands. If the tiller becomes

unbalanced, an unforeseen accident may occur.

NOTE:

When tilling hard ground, do not till deeply at first; instead, till the field 2 or

3 times. Do not push against the handlebar excessively.

When turning the tiller:

Disengage the main clutch and lower the engine speed. If the differential

lock is used, set it in the UNLOCK position (FR750 only). Set the gearshift

lever in 1 st gear, squeeze the clutch lever, and turn slowly. When the turn

has been completed, set the gearshift lever in the TINES/WHEELS

ENGAGE position and resume tilling.