- Honda Tiller Owner's Manual

ENGINE OIL CHANGE
OIL CAPACITY: 0.6 I? (0.6 US qt, 0.5 Imp qt)
Drain the oil while the engine is warm
to assure rapid and complete draining.
1. Place a suitable container in front of
the tiller to catch the used oil.
2. Remove the oil filler cap/dipstick
and drain bolt.
3. Tilt the tiller forward and allow all of
the oil to drain.
4. Reinstall and tighten the oil drain
bolt. Refill with the recommended
oil (page 10) to the top of the oil filler
neck.
5. Reinstall the oil filler cap/dipstick.
Wash your hands with soap and water
after handling used oil.
NOTE:
Please dispose of used motor oil in a
manner that doesn’t harm the environ-
ment. Do not throw it in the trash or
pour it on the ground or down a drain.
UPPER LIMIT
ENGINE OIL FILLER
CAP/DIPSTICK
OIL DRAIN BOLT
.
.
4
c
- ---
-
---
\
- --
-
--
36