- Honda Tiller Owner's Manual

Inspection
1. Check for damaged, bent, or loose tines. If looseness or damage is found,
tighten or replace the damaged tines.
t
2. Check that the rotary tine shaft’s clevis pin is not missing or damaged. If
necessary, replace with a new clevis pin and lock pin.
NOTE:
To prevent the clevis pin from falling out, insert the lock pin in the direction
opposite to the direction of rotation of the tines.
CLEVIS PIN
FORWARD
DIRECTION
‘LOCK PIN
3. Replace a tine when the tine width has worn to less than 15 mm (0.60 in)
in the area 80 mm (3.15 in) from the end of the tine.
For efficient tilling work, do not delay in replacing a worn tine.
NEW TINE
REPLACEMENT PERIOD
80 mm
ABOUT 15 mm
51