- Honda Tiller Owner's Manual

While pushing the rotary tines in the direction of rotation and the opposite

direction, fasten the nut securely.

PUSH

BOL

DIRECTION OF ROTATION

These points should

make contact.

When assembling the rotary tines and holders, the match marks have to be

aligned. If they are incorrectly assembled, vibration will be produced. As-

semble them according to the following procedure.

Line up the match marks on the forward tine holder and the reverse tine holder

and assemble. Assemble tine Ron the right side, facing the forward direction,

and tine L on the left side. Marks 2,4, A, and D are located at the base of the

tines. Refer to page 52.

FORWARD TINE HOLDER

TINE HOLDER

MATCH MARK