Automobile Parts User Manual

ENGLISH
Tiller type
Pump type
SETTING ENGINE SPEED
Standard/Tiller type:
Pump type:
Hot Restart
IMPORTANT SAFETY PRECAUTION
STARTER GRIP
STARTER GRIP
(EQUIPMENT SIDE)
CHOKE LEVER
CCLLOOSSEEDD
OOPPEENN
THROTTLE LEVER
Standard/Pump type:
MMIINN..
MMAAXX..
MMAAXX..
MMIINN..
THROTTLE LEVER
MMIINN..MMAAXX..
OOPPEENN
Tiller type:
5
Pull the starter grip lightly until you feel resistance, then pull
briskly. Return the starter grip gently.
Turn the engine switch on the equipment to the OFF position.
Pull the starter grip 3 to 5 times.
Follow the STARTING THE ENGINE procedure on page andstart
the engine with the choke lever in the OPEN position.
Turn the engine switch to the OFF position.
Move the choke lever to the OPEN position.
Pull the starter grip 3 to 5 times.
Follow the STARTING THE ENGINE procedure on page andstart
the engine with the choke lever in the OPEN position.
Position the throttle lever for the desired engine speed.
The throttle lever shown here will be connected to a remote
control on the equipment powered by this engine. Refer to the
instructions provided with the equipment for remote control
information and for engine speed recommendations.
Position the throttle lever for the desired engine speed.
For engine speed recommendations, refer to the instructions
provided with the equipment powered by this engine.
Hold the throttle lever on the equipment in the MAX. speed
position.
Hold the throttle lever in the MAX. speed position.
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine
warms up.
If the engine is operated at higher ambient temperatures, then
turned off and allowed to sit for a short time, it may not restart on
the first pull.
If necessary, use the following procedure:
Turn the engine switch to the OFF position before performing the
following procedure. This will prevent the engine from starting
and running at maximum speed when the throttle is in the MAX.
speed position. If the engine starts with the throttle in the MAX.
speed position, the equipment can move forward rapidly or the
trimmer attachment can spin at maximum speed. This may result
in personal injury.
Move the choke lever to the OPEN position.
4.
5.
4.
1.
2.
3.
1.
2.
3.
4.
4
4
05/12/16 14:59:18 32Z6J600_005