Owner manual

12 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved.
40. Route the rear camera harness along the tailgate
as shown.
41. Remove the TORX bolt from the tailgate hinge, and
attach the harness clamp bracket B to the
tailgate using the TORX bolt you just removed. Do
not tighten the TORX bolt at this time.
39. Install clear adhesive tapes to the tailgate:
• Open the tailgate.
• Get the clear adhesive tapes. Using scissors,
cut 30 mm from the end of each adhesive
tape.
• Using isopropyl alcohol on a shop towel, clean
the tailgate where the adhesive tapes will
attach.
4N09043
K
TAILGATE
REAR
30 mm
TAILGATE
LIP
TAILGATE
CLEAR
ADHESIVE
TAPE
CLEAR
ADHESIVE
TAPE
30 mm
FIRST
ADHESIVE
TAPE
SECOND
ADHESIVE TAPE
5D10010
T
T50 TORX BOLT
(Do not tighten at this time.)
HARNESS CLAMP
BRACKET B
TAILGATE
HINGE
TAILGATE
4708092
K
REAR
TAILGATE
REAR CAMERA
HARNESS
www.collegehillshonda.com