Owner manual

© 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 5 of 17
11. Remove the rear trim panel cover (eight clips and
two retaining tabs).
14. Remove the left rear lower anchor bolt cover, and
remove the left rear seat belt lower anchor bolt.
• Seat belt anchor bolt torque:
30 to 35 N·m (22 to 25 lbs)
12. Remove the left rear seat belt upper anchor bolt
cover (four retaining tabs), and remove the left
rear seat belt upper anchor bolt.
• Seat belt anchor bolt torque:
30 to 35 N·m (22 to 25 lbs)
13. Remove the left rear pillar upper trim.
• With side airbag; pull the clip, and remove the
left rear pillar trim by releasing the one clip.
• Without side airbag; remove the left rear pillar
trim by releasing the two clips.
15. Remove upper clip, then pull the left rear pillar
lower trim out toward you to release two clips.
16. Remove the left rear taillight (two bolts, two clips
and vehicle connector). Remove the right taillight
the same way.
4715601
K
CLIP
LEFT REAR
SEAT BELT
ANCHOR BOLT
COVER
CLIP
4 RETAINING
TABS
LEFT REAR PILLAR
UPPER TRIM
LEFT REAR SEAT
BELT UPPER
ANCHOR BOLT
2 TABS
3924012H
LEFT SIDE RIGHT SIDE
VEHICLE
CONNECTOR
VEHICLE
CONNECTOR
2 CLIPS
BOLTS
VEHICLE
CONNECTOR
LEFT
TAILLIGHT
4715611
K
CLIP
2 CLIPS
LEFT REAR
LOWER
ANCHOR
BOLT COVER
LEFT REAR
SEAT BELT
LOWER
ANCHOR
BOLT
LEFT REAR
PILLAR
LOWER TRIM
4212381
T
6 CLIPS
REAR TRIM
PANEL COVER
CLIPS
2 RETAINING
TABS
www.collegehillshonda.com