Operation Manual

−
−
18 lbf·ft (25 N·m , 2.5 kgf·m)
1.6 US qt (1.5
)
83
Engine Oil
Servicing Your Honda
Add Engine Oil:
Improper disposal of drained f luids is
harmf ul to the environment.
Check the condition of the sealing
washer on the drain bolt. Replace the
washer every other time the oil is
changed.
Install the drain bolt and tighten it to the
specified torque:
Fill the crankcase with the
recommended oil (page ),
approximately:
Pour the drained oil into a suitable
container and dispose of it in an
approved manner (page ).
Install the oil filler cap/dipstick securely.
Stop the engine and wait 2 3 minutes.
Hold the motorcycle upright and check
that the oil level is at the upper level
mark on the oil filler cap/dipstick (page
).
Check that there are no oil leaks.
If a torque wrench is not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Start the engine and let it idle for 3 5
minutes.
5.
6.
7.
8.
9.
10.
11.
12.
77139
80
03/08/21 10:09:33 31KPJ630_092