Owner's Manual

AC Operation

1. Start the engine (refer to page 27).

2. Turn the voltage selector switch to either position.

With the voltage selector switch in the “1201240 V” position, you can use the

120 V and 120/240 V receptacles simultaneously. If you are NOT using the

120/240 V receptacle, but require more power from the 120 V twist lock

receptacle, then select the “120 V ONLY” position.

3. Switch ON the AC circuit breaker.

4. Plug in the appliance.

Most motorized appliances require

more than their rated wattage for

startup.

VOLTAGE SELECTOR AC CIRCUIT

SW1 BREAKER

Do not exceed the current limit specified for any one receptacle. If an

overloaded circuit causes the AC circuit breaker or circuit protector to switch

OFF, reduce the electrical load on the circuit, wait a few minutes and then reset

the circuit breaker.