Operation Manual

GENERATING SET USE
STARTING THE ENGINE
CAUTION:
•
Never start-up the generating set with devices connected to the receptacles, this could cause
their deterioration.
1. Put the stopping lever [1] on position “I” (fully raised to
the limit stop).
2. Put the engine speed lever [2] on position SLOW (fully
lowered to the limit stop).
3. Pull lightly on the recoil starter grip until you feel it resists,
then pull sharply.
This precaution is necessary to reduce the dangers of
injury caused by the sudden change of rotation direction
of the engine.
4. When the engine is cold, leave the engine speed lever
on position SLOW (fully lowered to the limit stop) for 2 to
3 minutes so that the engine reaches its operating
temperature.
CAUTION:
•
Do not let the recoil starter grip return sharply against the
engine. Bring it back gently to avoid damaging the starter.
•
Never use starting additives composed of flammable and
volatile substances which might cause an explosion on
starting the engine.
•
When running, do not touch the recoil starter grip as this
could damage the engine and/or the starter.
5. When the engine has reached its running temperature,
bring the engine speed lever [2] to MAX. position (fully
raised to the limit stop).
11
2
1
2
-
STAGED
2
5 62 4
SAFETY