Operation Manual

EN 22 HOW TO USE THE MACHINE

5.3 DIRECTIONS BEFORE STARTING THE WORK

Before starting to work it is necessary to carry out several of checks and opera-

tions to ensure that the work gives the best results and is done in maximum safe-

ty.

5.3.1 S

EAT ADJUSTMENT

The sliding seat can be adjusted into six

positions.

The position is changed by pulling up the

handle (1) and sliding the seat along to the

notch of the position wanted.

5.3.2 T

YRE PRESSURE

Having the correct tyre pressure is the

main condition for ensuring that the cut-

ting deck is horizontal and thus mows

evenly.

Unscrew the valve caps and connect a

compressed air line with a gauge to the

valves.

The pressures are:

FRONT 1.0 bar

REAR 1.2 bar

5.3.3 F

ILLING WITH OIL AND FUEL

The type of oil and fuel to use is given in the engine manual.

With the engine stopped, check its oil level. Exactly following the methods

NOTE