Operation Manual

encrusted grass and mud which

could make it difficult to insert the

deflector cap.

Put the cutting deck into position "7",

then remove the grass-catcher and

insert the mulching plug (1) in the

outlet, pushing it right inside the col-

lector channel until it blocks.

Hook the two elastic tie-rods (3) onto

the holes provided and refit the

grass-catcher.

It is important to

attach the elastic tie-rods (2) cor-

rectly, to ensure that the mulching

plug is secured inside the cutting

deck and to prevent it from touch-

ing the rotating blades. For this very reason, you need to replace the worn elas-

tic tie-rods in time.

B) Grass cutting

For efficiency reasons, the lawn should be mowed at frequent, regular intervals,

in order to reduce the height of grass to be cut.

Always avoid removing a large quantity of grass, to avoid blocking the cutting

deck or overloading the engine and the cutting parts.

Regulate the forward speed depending on the lawn conditions and the quantity of

grass removed.

C) Removing

Reverse the order of the steps described above.

IMPORTANT

EN 37HOW TO USE THE MACHINE