Operation Manual

6.4.4 REPLACING A FUSE
The general and power circuits of the
electrical system are protected by a 6.3 A
delayed fuse (1).
When the fuse blows, the machine stops
and all the lights on the dashboard go out.
A 25 A fuse (2), is also provided for pro-
tecting the recharge circuit.
A blown fuse must
always be replaced by one of the same
type and ampere rating, and never with
one of another rating.
If you cannot find out why the fuse has
blown, consult your Dealer.
6.4.5 R
EPLACING BELTS
Replacing belts is quite a complicated process of dismantling and subsequent
adjustment and must only be carried out by your Dealer.
Replace the belts as soon as they show obvious signs of
wear! ALWAYS USE GENUINE REPLACEMENT BELTS!
NOTE
IMPORTANT
EN 49MAINTENANCE
1 - 6,3 Amp
2 - 25 Amp