SDS

ManualsBrandsHonda ManualsLawn MowersGCV190 21 in. Nexite Deck 4-in-1 Select Drive Walk Behind Gas Self Propelled Mower with Electric Start

Not applicable for Valve Regulated Lead Acid battery.

Reference (component)

Electrolyte (Sulfuric Acid)

Lead

Appearance

Clear

Silvery solid

Specific Gravity

1.280 - 1.380 (38 - 48 %)

11.3

Boiling Point

112 deg.C (38 %)

1740 deg.C

Melting Point

- 40 deg.C or below

327 deg.C

Solidifying Point

- 56.4 deg.C (34.6 %)

Vapor Pressure

3.17 kPa (30 %)

0.1 Pa or less (25 deg.C)

SECTION 7: HANDLING AND STORAGE

Handling

Keep away from ignition sources, heat and flame. Such batteries must be packed in inner packages

in such a manner as to effectively prevent short circuits and to prevent movement which could lead to

short circuits. Avoid mechanical or electrical abuse and overcharge. More than a momentary short

circuit will generally reduce the battery service life. Avoid reversing battery polarity within the battery

assembly.

Storage:

Store in a cool; well-ventilated area. Keep away from ignition sources, heat and flame. Such batteries

must be packed in inner packages in such a manner as to effectively prevent short circuits and to

prevent movement which could lead to short circuits. Materials to Avoid: Strong oxidant, Combustible

materials and Corrosives.

Charging:

There is a possible risk of electric shock from charging equipment and from strings of series

connected batteries, whether or not being charged. Shut-off power to chargers whenever not in use

and before detachment of any circuit connections. Batteries being charged will generate and release

flammable hydrogen gas. Charging space should be ventilated. Keep battery vent caps in position.

Prohibit smoking and avoid creation of flames and sparks nearby. Wear face and eye protection

when near batteries being charged.

SECTION 8: EXPOSURE CONTROL AND PERSONAL PROTECTION

SECTION 9: PHYSICAL/CHEMICAL PROPERTIES

SECTION 10: STABILITY AND REACTIVITY

Stability: Stable under normal temperatures and pressures.

Materials to Avoid: Strong oxidant, Corrosives.

Conditions to Avoid: Avoid exposure to heat and open flame, Avoid mechanical or electrical abuse

and overcharge. Prevent short circuits. Prevent movement which could lead to short circuits.

Hazardous Polymerization: Will not occur.

Hazardous Decomposition Products: Sulfur oxides, Sulfuric acid mist, Metal oxides.