Owner's Manual

SERVICING YOUR SNOWBLOWER

TRACK ADJUSTMENT

Make sure the tracks are clean and dry before adjustment. The tracks

cannot be correctly adjusted if clogged with snow or debris, or coated

with ice.

With the snowblower resting on its tracks, check track deflection by

pressing down midway between the wheels with a force of 33 lbf



(15 kgf).

When correctly adjusted, track deflection should be:

1-1/16–1-5/16 in (27–33 mm)

Adjusting Procedure

1.Loosen the left and right tension

bolt lock nuts at the rear axle, and

turn the adjusting nuts to

correctly tension both tracks.

2.After adjustment, tighten the lock

nuts securely.

1-1/16–1-5/16 in

(27–33 mm)

TRACK

TENSION BOLT

LOCK NUT

ADJUSTING

NUT

31V046020.book 45 ページ２０１４年５月１９日　月曜日　午後２時３０分