Owner's Manual

SERVICING YOUR SNOWBLOWER

SKID SHOES AND SCRAPER

Turn the engine switch to the OFF position, and disconnect the spark

plug cap, so the engine cannot be accidentally started while you are

near the auger.

Inspection

1.Raise the auger housing off the

ground.

Track type:

Step on the foot pedal (see page

14), and raise the auger to the

highest position.

Wheel type:

Place a block of wood under the

scraper to support the auger.

2.Measure the thickness of the right

and left skid shoes at their

thinnest point.

Replace the skid shoes if they are

worn to the specified service limit.

A=NEW thickness 

B=WORN thickness

SKID SHOE SERVICE LIMIT

Rear-mount type 3/32 in

(2.5 mm)

Side-mount type 1/16 in

(1.5 mm)

<Rear-mount type>

<Side-mount type>

31V046020.book 48 ページ２０１４年５月１９日　月曜日　午後２時３０分