Owner's Manual

54
STORAGE
Engine Oil
1.Change the engine oil (see page 39).
2.Remove the spark plug (see page 43).
3.Pour a teaspoon (5 cc) of clean engine oil into the cylinder.
4.Pull the starter rope slowly several times to distribute the oil.
5.Reinstall the spark plug.
6.Pull the starter grip slowly until you feel resistance, then return the
starter grip gently. This will close the valves so moisture cannot
enter the engine cylinder.
Tires
Check the air pressure (see page 46).
31V046020.book 54 ページ ２０１４年５月１９日 月曜日 午後２時３０分