Owner's Manual

57
TRANSPORTING
LOADING
1.Track type: Step on the foot pedal, and raise the auger to the HIGH
position (see page
14).
2.Start the engine (see page 21) and maneuver the snowblower into
line with the loading ramp.
3.Track type: Run the snowblower slowly up the loading ramp.
Wheel type: Push down the handles to raise the auger and run the
snowblower up the loading ramp.
Be careful to avoid striking the chute or other parts of the machine.
4.After the snowblower is in the truck, stop the engine, and turn the
fuel valve to the OFF position. This will prevent the possibility of
carburetor flooding and will reduce the possibility of fuel leakage.
5.Tie the snowblower down with rope or straps, and block the treads.
Keep the tie-down rope or straps away from controls and cables.
DOWN
UP
L
H
REVERSE
4.9 ft (1.5 m)
minimum headroom
31V046020.book 57 ページ ２０１４年５月１９日 月曜日 午後２時３０分