Replacement Part List
13
2. Outline
2.1 Name of Parts and Their Functions
The hedge trimmer is a device with the attachment installed to the powerhead (separately sold).
The following is the structure of the attachment and name and function of each part.
Note
● There is one type of powerhead. For details about the powerhead, refer to the powerhead manual.
1
3
4
8
6
7
2
5
■ SSHH-S
No. Name Description
1 Trimmer blade A steel blade to cut the hedges or low trees.
2 Cutter guard A guard to protect hands and legs from trimmer blade.
3 Transmission case It converts the rotation of the gear case into the trimmer blade oscillation.
4 Gear case It transmits the rotation of the drive shaft to the transmission case.
5 Trimmer blade guard A guard to cover the trimmer blade when the hedge trimmer is not used.
6 Adjustment lever A lever to adjust the angle of the trimmer blade appropriately.(Gray)
7 Lock lever A lever to lock the trimmer blade to a necessary position.(Yellow)
8 Shaft tube Mainframe with a built-in drive shaft.