Owner's Manual

32
SERVICING YOUR PUMP
ENGINE OIL CHANGE
DRAIN PLUG
OIL FILLER CAP/DIPSTICK
OIL LEVEL
SEALING WASHER
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
Place a suitable container below the engine to catch the used oil,
and then remove the oil filler cap/dipstick, drain plug and sealing
washer.
Screw in the oil filler cap/dipstick securely.
Allow the used oil to drain completely into an approved container,
then reinstall the drain plug with a new sealing washer, and tighten
it securely.
With the engine in a level position, fill to the edge of the oil filler hole
with the recommended oil (see page ).
0.59 US qt (0.56 L)
0.61 US qt (0.58 L)
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of used motor oil
properly. Put it in a sealed container, and take it a recycling center.
Do not throw it in the trash, pour it on the ground, or pour it down a
drain.
1.
2.
3.
4.
Engine oil capacities
WB20XT:
WB30XT:
33
11/08/01 15:07:51 31YG3610_033