Owner's Manual

−−
−
−
37
SERVICING YOUR PUMP
SPARK PLUG SERVICE
SPARK PLUG CAP
SSPPAARRKK PPLLUUGG WWRREENNCCHH
SEALING WASHER
0.028 0.031 in
(0.7 0.8 mm)
In order to service the spark plug, you will need a spark plug wrench
(commercially available).
BPR6ES
0.028 0.031 in (0.7 0.8 mm)
Measure the spark plug
electrode gap with a suitable
gauge.
Correct the gap, if necessary, by
carefullybendingtheside
electrode.
The gap should be:
Inspect the spark plug. Replace
it if the electrodes are worn, or
if the insulator is cracked or
chipped.
Incorrect spark plugs can cause engine damage.
For good performance, the spark plug must be properly gapped and
free of deposits.
Remove the spark plug with a 13/16-inch spark plug wrench.
Disconnect the spark plug cap, and remove any dirt from around the
spark plug area.
Allow the engine to cool before servicing the spark plug.
1.
2.
3.
4.
Recommended spark plug: (NGK)
11/08/01 15:08:35 31YG3610_038