Brochure
Model WX10T WX15T WB20XT3 WB30XT3 WH15SXTA WH20XTAF
Honda 4-stroke, GX25 GXH50 GX120 GX160 GX120 GX160
single cylinder, air cooled engine OHV OHV OHV OHV OHV OHV
Displacement 25cc 49cc 118cc 163cc 118cc 163cc
Compression ratio 8.0:1 8.0:1 8.5:1 9.0:1 8.5:1 8.5:1
Honda Oil Alert
®
N/A Std Std Std N/A N/A
Pump type Lightweight Lightweight General Purpose General Purpose High Pressure High Pressure
Centrifugal Centrifugal Centrifugal Centrifugal Centrifugal Centrifugal
Self-priming Self-priming Self-priming Self-priming Self-priming Self-priming
Volute Aluminum Aluminum Rigid Mounted Rigid Mounted Rigid Mounted Rigid Mounted
Cast Iron Cast Iron Cast Iron Cast Iron
Impeller Aluminum Aluminum 4 Vane Cast Iron 4 Vane Cast Iron Cast Iron Cast Iron
Mechanical Seal Carbon/Ceramic Carbon/Ceramic Silicon Carbide/ Silicon Carbide/ Carbon/Ceramic Carbon/Ceramic
(Pump case/impeller) Silicon Carbide Silicon Carbide
Priming time 80 sec. at 16.4 ft. 120 sec. at 16.4 ft. 110 sec. at 16.4 ft. 150 sec. at 16.4 ft. 80 sec. at 16.4 ft. 80 sec. at 16.4 ft.
Drive system Direct Direct Direct Direct Direct Direct
Discharge capacity 32 gal/min 74 gal/min 164 gal/min 290 gal/min 98 gal/min 119 gal/min
Suction port diameter 1.0" NPT 1.5" NPT 2" NPT 3" NPT 1.5" NPT 2" NPT
Discharge port diameter 1.0" NPT 1.5" NPT 2" NPT 3" NPT 1.5" NPT 2" NPT
Total head lift 121 ft. 121 ft. 105 ft. 85 ft. 131 ft. 148 ft.
Suction head lift 26 ft. 26 ft. 25 ft. 25 ft. 26 ft. 26 ft.
Maximum pressure 52 psi 52 psi 45 psi 37 psi 57 psi 64 psi
Maximum solids handling
†
0.25" 0.25" 0.315" 0.315" 0.125" 0.125"
Dimensions (LxWxH) 13.4" x 8.7" x 11.6" 14.0" x 10.8" x 14.8" 19.3" x 14.4" x 16.5" 20.1" x 15.2" x 17.9" 16.3" x 14.2" x 16.3" 20.5" x 15.7" x 18.1"
Dry weight 13 lbs. 20 lbs. 44 lbs. 57 lbs. 49 lbs. 60 lbs.
•
•
•
•
Model WT20XK4A WT30XK4A WT40XK3A WDP30XK2AT WMP20X1
Honda 4-stroke, GX160 GX270 GX390 GX120 GX160
single cylinder, air cooled engine OHV OHV OHV OHV OHV
Displacement 163cc 270cc 390cc 118cc 163cc
Compression Ratio 9.0:1 8.5:1 8.2:1 8.5:1 9.0:1
Honda Oil Alert
®
STD STD STD STD STD
Pump type Trash Trash Trash Multi-Purpose
Centrifugal Centrifugal Centrifugal Diaphragm Centrifugal
Self-priming Self-priming Self-priming Self-priming Self-priming
Volute Rigid Mounted Rigid Mounted Rigid Mounted Rigid Mounted
Cast Iron w/ Cast Iron w/ Cast Iron w/ Fiberglass Reinforced
Stainless Wear Plate Stainless Wear Plate Stainless Wear Plate Polyester
Impeller Fiberglass Reinforced
Polyester
Mechanical seal Silicon Carbide/ Silicon Carbide/ Silicon Carbide/ Carbon/Ceramic
(Pump case/impeller) Silicon Carbide Silicon Carbide Silicon Carbide
Priming time 60 sec. at 16.4 ft. 90 sec. at 16.4 ft. 150 sec. at 16.4 ft. 20 sec. at 20.0 ft. 65 sec. at 16.4 ft.
Drive system Direct Direct Direct Direct Direct
Discharge capacity 185 gal/min 317 gal/min 423 gal/min 80 gal/min 220 gal/min
Suction port diameter 2" NPT 3" NPT 4" NPT 3" NPT 2" NPT
Discharge port diameter 2" NPT 3" NPT 4" NPT 3" NPT 2" NPT
Total head lift 85 ft. 82 ft. 82 ft. 50 ft. 102 ft.
Suction head lift 26 ft. 26 ft. 26 ft. 24 ft.** 26 ft.
Maximum pressure 37 psi 36 psi 36 psi N/A 44 psi
Maximum solids handling
†
0.8125" 1.0625" 1.0625" 2.4" N/A
Dimensions (LxWxH) 24.4" x 18.1" x 18.3" 26.0" x 19.5" x 20.3" 28.9" x 21.1" x 22.2" 31.5" x 30.5" x 25.7"* 20.5" x 15.7" x 17.7"
Dry weight 104 lbs. 134 lbs. 172 lbs. 163 lbs. 57 lbs.
• • • • •
Wheel Kit OPT
OPT
OPT STD N/A
De-Watering
LIGHTWEIGHT GENERAL PURPOSE HIGH-PRESSURE
Submersible
WSP33K1AA WSP53AA WSP73AA WSP50AA WSP100AA
Submersible Submersible Submersible Submersible Submersible
Standard Standard Standard Trash pump Trash pump
Automatic Automatic Automatic Automatic Automatic
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1/3 1/2 3/4 1/2 1
115 115 115 115 115
10 36 48 34 47
4 9 12.2 8.3 11.1
Continuous Continuous Continuous Continuous Continuous
Class F Class F Class F Class F Class F
Built-In Thermal Built-In Thermal Built-In Thermal Built-In Thermal Built-In Thermal
Automatic Reset Automatic Reset Automatic Reset Automatic Reset Automatic Reset
40 gal/min 70 gal/min 74 gal/min 110 gal/min 150 gal/min
23 44 54 32 42
1.25 FNPT 1.5 FNPT
†
1.5 FNPT
†
2.0 FNPT 2.0 FNPT
10 psi 19 psi 23 psi 14 psi 18 psi
0.375" 0.375" 0.375" 2.0" 2.0"
Glass-filled Noryl Stainless Steel Stainless Steel Single Channel Single Channel
Stainless Steel Stainless Steel
Single Carbon Ceramic Tandem Mechanical Tandem Mechanical Tandem Mechanical Tandem Mechanical
Upper/Rubber Lip Carbon/Ceramic- Carbon/Ceramic- Carbon/Ceramic- Carbon/Ceramic-
Lower upper SIC/SIC-lower upper SIC/SIC-lower upper SIC/SIC-lower upper SIC/SIC-lower
20 50 50 25 25
Heavy-Duty 115V Heavy-Duty 115V Heavy-Duty 115V Heavy-Duty 115V Heavy-Duty 115V
6.4" x 10.3" 8.3" x 17.2" 8.3" x 17.2" 9.0" x 21.5" 9.0" x 22.8"
6.4" 8.3" 8.3" 9.0" 9.0"
11 lbs. 27 lbs. 27 lbs. 36 lbs. 41 lbs.
Model
Pump Type
Starting Type
Casing
Motor (HP)
Voltage
Starting amps
Running amps
Duty
Motor insulation
Overheat protection
Discharge capacity
Max. head (feet)
Port diameter ( inches)
Maximum psi
Solids handling
Impeller
Seals
Cord length (feet)
Cord type
Dimensions (WxH)
Pump diameter
Dry weight (lbs.)
Agricultural Chemicals
WMP20X1 Approved Pumping Applications
Industrial Chemicals
*Temperature does not exceed 27°C (80°F).
Acetic Acid, 20%
Aluminum Sulfate
Ammonium Nitrate
Ammonium Sulfate
Barium Sulfate
Borax (Sodium Borate)
Calcium Chloride*
Citric Acid
Copper Sulfate
Detergents (general)
Ethylene Glycol
Fatty Acids
Ferric Nitrate
Ferric Sulfate
Ferrous Sulfate
Formaldehyde, 40%
Glycerine (Gycerol)
Lactic Acid
Lead Acetate
Magnesium Chloride
Magnesium Nitrate
Magnesium Sulfate
Maleic Acid
Nickel Chloride
Nickel Sulfate
Oleic Acid
Phosphoric Acid, 0-80%
Potassium Carbonate
Potassium Chloride
Potassium Nitrate
Potassium Sulfate
Soaps (neutral)
Sodium Acetate
Sodium Bicarbonate
Sodium Bisulfate
Sodium Carbonate, 10%
Sodium Chlorate
Sodium Chloride
Sodium Nitrate
Sodium Silicate
Sodium Sulfate
Stearic Acid
Sulfuric Acid, 0-29%
Tartaric Acid
Vinegar
Water (clear)
Water (salt)
Zinc Sulfate
Aatrex
Amiben
Ammonium Thiosulfate
Avenge
Banvel
Basagran
Bicep
Bladex
Dual
Eradicane
Extrazine
Larsban
Lasso
URAN Solutions
Modown
N-Serve 24
Phosphoric Acid Solutions
Poly-N
Ranger
Round-Up
Sutan
Treflan
Vernam
• Do not use the WMP20X1 for pumping liquids for human consumption.
• After each use, drain the pump housing into a suitable container and flush with fresh water.
• The temperature operating range of the pump is between -7 and 54°C (20 and 130°F).
†
2" adaptor included