Instructions / Assembly

Step 5: Repeat above step again to assemble two single cross braces (Part C) at
the front and back of the trellis. Position see figure 7.
Figure 6
That’s finish your assembly, enjoy your gardening.
Short Cross
Brace: C
Cross Braces
Cross Braces
Step 8: Instructions for using rotating hole rod(I)
Use the rotating hole rod(I) to drill a hole at least 12-14 inches deep in the soil in
advance. Press the 6 stakes into the ground at least 12-14 inches, and make sure
it is secured.
Step 7: Unfold the net (Part H) carefully and
spread it over to the assembled frame of trellis.
(Ladder needed if necessary) Fix securely the
net by the hooks on the ends of the cross
braces. Or you can use some extra nylon cable
ties (not provided) to fix the net if necessary.
(See figure 9)
Step 9: Choose a desired location to place your Arched Trellis which is to keep
away from high wind and keep out of reach of young children and pets.
Angel
Support
Cross
Braces
Staked
Support
Figure 9
Cross
Braces
Hooks
Netting
Netting
Figure 7
08 09
Step 6: Put the assembled frame down
carefully, and Insert the 6 stakes (Part D) into
the other side of the 6 angled tubes（Part B）
(See figure 8). Put the product back upright
after installation.
Step 4: Repeat above step to assemble other 6 cross braces (Part E). The
assembly completed picture is as follows (See figure 6)
Figure 8