Information

Honeywell

Compatible fluids - polysulphone

Whilst the following list may be used as a guide and gives common industrial fluids

that are typically acceptable, we recommend that before use you check that the fluid

you wish to use this device in is compatible with polysulphone.

Acetic acid – Glacial Glycerol

Acetic acid - 10% Heptane

Ammonia - 88 Hydrochloric acid 10%

Ammonium Hydroxide - 10% Hydrochloric acid conc.

Ammonium Chloride - 10% Hydrogen Peroxide

Aviation spirit Isopropanol

Benzene Iso-Octane

Benzoic acid Kerosene

Bleach Linseed oil

Brine Magnesium Sulphate

Butane Methanol

Butanol

Calcium Nitrate Motor oil

Calcium Hyphochlorite Nitric acid 10%

Carbon Tetrachloride Oils - Vegetable

Chromic acid Oxalic acid

Copper Sulphate

Creosote Petroleum Ether

Cyclohexane Potassium Hydroxide 10%

Cyclohexanol Potassium Hydroxide 50%

Detergent solutions Silicone fluids

Silver Nitrate

Diethylamine Soap solution

Diethyl Ether Sodium Chloride

Dioctyl Phthalate Sodium Hydroxide 10%

Edible fats and oils Sodium Hydroxide 50%

Ethanol 50% Sulphuric acid 10%

Ethyl Alcohol Transformer oil

Ethylene Glyco Turpentine

Ferric Chloride Varnish

Formaldehyde Water

Formic acid White spirit

Further information on this grade of polysulphone (UDEL

P1700 Infrared Black) can

be found via the manufacturer’s website at http://www.bp.com