User Guide

CANOPY INSTALLATION

18. Lift the canopy up so the partially installed mounting

bracket screws are situated in the L-slots on each

side of the canopy. Rotate the canopy clockwise

and install the two remaining mounting bracket

screws and washers (Fig. 18).

Mounting

Bracket

Canopy

Fig. 18

Washer

Mounting

Bracket

Screw and

Washer

Mounting Bracket

Screw

Blade Screws

Blade

Blade Screw

BLADE INSTALLATION

Fig. 19

19. Insert the blade through the slot on the band on

the motor housing. Alight the holes and attach the

blade to the motor housing with blade screws and

washers. Tighten each blade screw starting with

the one in the middle. Repeat for remaining blades

(Fig. 19).