User Guide

Bulb
22. Lift the glass globe up to the light kit and twist tightly
in a clockwise direction until it is secure (Fig 22).
Fig. 21
Fig. 20
Fig. 22
LIGHT KIT INSTALLATION
21. Install the bulbs (Fig. 21).
Important: When replacing the bulbs, let the bulbs and
light kit cool before touching them.
20. Remove one of the three tter plate screws located
on the underside of the motor assembly and loosen
the other two screws. Then connect the single pin
connectors from the switch housing to the single
pin connectors from the switch housing cap -- blue
to black and white to white. Ensure the plugs
connect tightly. Align the screw holes of the light kit
with the loosened tter plate screws. Then replace
and tighten all tter plate screws (Fig. 20).
Warning: Bulbs contain mercury. Manage in
accordance with Spills, Disposal and Site Cleanup
Requirements. In case of breakage, follow cleanup
procedures provided at www.epa.gov/ccleanup or
1-866-284-4010.
1313
Socket
Light Kit
Screws
Light Kit
Trim
Glass Shade