User Guide

Fig. 23

Reverse

Switch

OPERATING INSTRUCTIONS

Fig. 24

Fig. 25

23. Use the fan reverse switch, located on the side

of the motor housing, to optimize your fan for

seasonal performance (Fig. 23).

Using a ceiling fan will allow you to raise your

thermostat in the summer and lower your

thermostat in the winter without sacricing comfort.

Important: Wait for the fan to stop before moving the

reverse switch. The reverse switch must be set

either completely left or right in order for the fan to

function correctly. If the reverse switch is set in the

middle position, the fan will not operate.

24. In warmer weather, push the reverse switch left,

which will result in downward airow creating a

wind chill effect (Fig. 24).

Note: Energy savings are possible by turning on the

ceiling fan and setting the thermostat a few degrees

warmer. To maximize savings, turn ceiling fan off

when no one is in the room.

25. In cooler weather, push the reverse switch right

and the fan to low, which will result in upward airow

that can help move stagnant, hot air off the ceiling

area. By mixing the air, the heat may not have to run

as often and may yield energy savings (Fig. 25).