User Guide

Set Screw

STANDARD OR ANGLE MOUNTING INSTRUCTIONS

7. Remove the downrod pin and downrod clip from

the downrod (Fig. 7).

Downrod

Clip

Downrod

Fig. 7

Fig. 6

Fig. 8

Downrod

Canopy

Yoke

Cover

Motor

Housing

Downrod Pin

Downrod Clip

8. Thread the wires from the motor housing through

the yoke cover, canopy and out the top of the

downrod (Fig. 8).

6. Partially loosen the two set screws in the yoke at

the top of the motor housing (Fig. 6).