Datasheet

5
sensing.honeywell.com
MICRO SWITCH™ Watertight Miniature Basic Switches
PRODUCT NOMENCLATURE
Not all combinations of model code are available.
Please contact your Honeywell provider/representative for assistance.
V15W
Switch Type
A
Lever
Location
A
No lever
Lever pivot
far from
plunger
02
Lever
Type
Contact
Material
MICRO SWITCH™
V-Basic
Standard
V15W Watertight
Switch
Pin plunger
D
Terminals/Wiring
Z
Circuitry
D
4,8 mm x
0,8 mm
Z
SPDT
150
200
300
200
100
050
50 g max.
100 g max.
150 g max.
200 g max.
2
300 g max.
2
K
Metric
(Ø 3,1 mm)
Mounting
Holes
USA
(Ø 2,9 mm)
Operating
Force
—
Standard
silver alloy
W
E
4,8 mm x
0,5 mm
300 mm long
wires
1
C
P
SPNO
SPNC
B
Lever pivot
near plunger
01
02
03
Short straight
lever
Standard
straight lever
Long straight
lever
04
05
06
Simulated
roller lever
Roller lever
Long roller
lever
W1
Electrical Rating
(must be included)
A
Gold-plated
silver alloy
— A
0.1 A, 125/250 Vac
0.1 A, 30 Vdc
W2
W3
6 A, 125/250 Vac
5 A, 30 Vdc
10 A, 125/250 Vac
2
5 A, 30 Vdc
2
W1
S
Special
99
Special
Special
Designator
A special designator
code is used to
indicate some
non-standard feature
such as a special
actuator, wire color,
wir
e length, connector,
etc. Review product
specification to
determine the nature
of the non-standard
feature. This code
will consist of up to
three alphanumeric
characters. A blank
designates no
difference from
standard listing.
1
Electrical rating and
wire type (standard)
W1: 24 AWG (0,20 mm
2
)
W2: 18 AWG (0,82 mm
2
)
W3: 16 AWG (1,31 mm
2
)
2
200 g and 300 g operate
forces are the only forces
allowed with the W3 electrical
rating.
Table 1. Specifications
Characteristic Parameter
Circuitry SPDT, SPNO, SPNC
Operating force 50 gf, 100 gf, 150 gf, 200 gf, 300 gf
Termination
quick connect: 4,8 mm x 0,8 mm
quick connect: 4,8 mm x 0,5 mm
300 mm lead wire length
Actuators (levers 300 series
stainless steel)
pin plunger, short straight lever, standard straight lever, long straight lever,
simulated roller lever, roller lever, long roller lever
Agency certification UL, cUL, ENEC, CQC
Sealing
IP67 (leaded versions)
IP00 (quick-connect versions due to exposed terminal)
Plunger sealing silicone
Operating temperature -40 °C to 85 °C [-40 °F to 185 °F]
Mechanical life (cycles) 1,000,000 cycles min. @ 180 cycles/minute max.
Dielectric strength
500 Vac (RMS) for 1 minute
leakage current ≤ 0.5 mA between open contacts
Switch resistance (initial) 300 mΩ max.
Insulation resistance 100 MΩ min. (500 Vdc for 1 minute)
Contact material silver alloy, gold-plated silver alloy
Housing material PBT thermoplastic polyester
Table 2. Electrical Ratings
Switch option cUL, UL per 61058-1, File 12252 CQC per GB15092-1, ENEC per 61058-1
W1
0.1 RA (Resistive Amp) 125/250 Vac
0.1 RA 30 Vdc
0.1 A 125/250 Vac
0.1 A 30 Vdc
W2
6 RA (Resistive Amp) 125/250 Vac
5 RA 30 Vdc
6 A 125/250 Vac
5 A 30 Vdc
W3
10 RA (Resistive Amp) 125/250 Vac
5 RA 30 Vdc
10 A 125/250 Vac
5 A 30 Vdc
Note: cUL, UL, ENEC, and CQC use temperature is 55 °C max. for wired versions, 85 °C max. for terminal versions.