Datasheet

3
sensing.honeywell.com
General Specifications
Table 1. Absolute Maximum Ratings
1
Characteristic Min. Max. Unit
Supply voltage (V
supply
) -0.3 6.0 Vdc
Voltage on any pin -0.3 V
supply
+ 0.3 V
Digitalinterfaceclockfrequency:
I
2
C
SPI
100
50
400
800
kHz
ESDsusceptibility(humanbodymodel) 2 — kV
Storage temperature -40 [-40] 85[185] °C [°F]
Solderingtimeandtemperature:
leadsoldertemperature(DIP)
peakreflowtemperature(LeadlessSMT,SMT)
4smax.at250°C[482°F]
15smax.at250°C[482°F]
1
Absolute maximum ratings are the extreme limits the device will withstand without damage.
Table 2. Environmental Specifications
Characteristic
Parameter
Humidity(Gasesonly;see“OptionsNandD”inFigure2.) 0%to95%RH,non-condensing
Vibration 15 g, 10 Hz to 2 kHz
Shock 100g,6msduration
Life
1
1 million pressure cycles minimum
Solder reflow
J-STD-020-D.1MoistureSensitivityLevel1
(unlimited shelf life when stored at <30°C/85%RH)
1
Lifemayvarydependingonspecificapplicationinwhichthesensorisused.
Table 4. Sensor Pressure Types
Pressure Type Description
Gage Output is proportional to the difference between applied pressure and atmospheric (ambient) pressure.
Differential Output is proportional to the difference between the pressures applied to each port (Port 1 – Port 2).
Table 3. Wetted Materials
1
Component Pressure Port
No SIlicone Gel Coating Option Silicone Gel Coating Option
Ports and covers high temperature polyamide
Substrate alumina ceramic
NOTnot exposed; protected by silicone gel
Adhesives epoxy, silicone epoxy
Electroniccomponents ceramic, silicon, glass, solder, gold not exposed; protected by silicone gel
1
Contact Honeywell Customer Service for detailed material information.