Submittal Sheet

SERIES 61 AND SERIES 62 MODUTROL IV™ MOTORS

63-2629—06 6

— Sufficient damper linkage to reach the motor shaft.

• All valve linkages except the Q5001.

NOTE: When the bracket is not used in a replacement

application, the damper linkage requires adjustment

for the new shaft position.

To mount the motor with the bracket:

1. Mount the bracket to the equipment with existing or stan-

dard bolts.

2. Using the provided bolts, mount the motor to the bracket

threaded holes. See Fig. 3.

For valve linkage applications (other than the Q5001):

1. Mount the bracket to the linkage.

2. Position the motor on the bracket to align the motor shaft

with the linkage.

3. Attach the motor to the bracket with the four bolts

provided. See Fig. 4.

Fig. 3. Mounting the motor with an adapter bracket.

M18999

EQUIPMENT

BASE

ADAPTER

BRACKET

STANDARD

BOLTS (4)

MOTOR

BOLTS

PROVIDED (4)

WIRING

BOX

NON-SPRING RETURN

SPRING RETURN

1 #12 OR 1/4" ZINC PLATED

MACHINE SCREWS OR BOLTS

POWER

END

POWER END