user manual

Total Connect Online Help Guide
– 14 –
Device Control
The Device Control tab displays the current status of the security system’s programmed relays, and enables you to
remotely turn them on or off. For commercial panels, the Description column is populated automatically. To control a
device, choose the device and select Start or Stop as desired.
Event History
The Event History tab enables you to view and print the event history for the security system or any partition. A drop-
down "Event Types" menu enables you to filter the events to be viewed.
Users
The Users tab enables you to manage security system user codes. To access this Users tab, you will be prompted for your
4-digit security system code. The Users function is further divided into Manage User Names
and User Codes tabs. By
selecting the Manage User Names tab, you can view the users, and assign a personal name to each user.
For residential panels, the screen below appears with all the fields as shown. For commercial panels, the Get Panel
Users button does not appear.
Notice at the Manage User Names tab, there are three columns; Number
, User, and Full Name. The "Number" column
corresponds to the user slots in the control panel. The "User" column shows the names saved in the control panel that are
associated with the user slot (if names were entered for graphic AUI keypad use). The "Full Name" column is available
only for use by remote services, and enables you to assign a personal name or other identifying information to a user.