user manual

Total Connect Online Help Guide
– 17 –
Keypad
The Keypad tab enables you to control the security system using an emulated keypad. Functions are performed in the
same manner as on a local keypad, however you CANNOT initiate panics. (Refer to your control panel user guide for
instructions on operating the system.) Note that you can also use the number keys on your PC's keyboard (ensure the
"Caps Lock" key is off) to perform most actions.
Setup
Note: This tab is available ONLY to a Master user that has authority to ALL partitions.
The Setup tab enables you to assign convenient familiar names to zones, partitions, and devices. It is further divided into
the following tabs.
Tab Function to . . .
Panel Info Displays the model, firmware version, and emulated keypad version for the control panel.
Name Zones Enables you to assign familiar names to the zones. Edit the desired field, then click Save Zone
Names.
Name Areas Enables you to assign familiar names to the partitions. Edit the desired field, then click Save
Settings.
Name Devices Enables you to assign familiar Device Names to system devices by editing the desired field. In
addition, the "Use" column allows you to enable access and control
of individual devices. After you
have made changes, click Save Settings.
Recover Enables you to rebuild the data retrieved from the panel and saved to the remote services
database. It does not modify or affect the actual data stored in the control panel. You must enter
your user code to perform this function.
Note: When data is saved, it only saves the information to the remote services database. It DOES NOT overwrite the
information in the control panel.