T4700 Chronotherm™ Electronic Programmable Line Voltage Thermostat OWNER’S GUIDE ® U.S. Registered Trademark Copyright © 2003 Honeywell International Inc.
Features • Night and day setback of space temperature can save up to 29 percent of the energy used to heat a controlled zone. • Offers up to a 12 percent energy saving during comfort periods compared with conventional bimetallic electric heating thermostat, according to the Electric Power Research Institute. • Digital temperature sensing and control for energy efficient precision operation. • Flexibility of 5-1-1 day or 7-day programming • Exceptional comfort control of resistance-rated heating equipment.
Contents Welcome ... to the world of comfort and energy savings with your new Honeywell programmable thermostat. Features ................................................. 2 Specifications ......................................... 4 Programming Thermostat....................... 5 Initial Power-Up ................................. 5 Factory Set Programming ................. 5 Thermostat Reset .............................. 6 Homeowner Programming ................ 6 Setting the Current Day and Time ........
Specifications Wiring: 6 in. (150 mm) stranded copper leadwires, suitable for connection to aluminum wiring if approved special service CO/ALR connectors are used. Models: T4700A: SPST; makes heating circuit on temperature fall. T4700B: DPST; makes heating circuit on temperature fall. Breaks both sides of 240 volt line with switch in OFF position. Electrical Ratings (Noninductive): 3800W, 16A maximum; 500W, 2A minimum at 240V, 60 Hz. Sensing Element: Electronic thermistor.
Programming Thermostat Factory Set Programming The thermostat defaults to a normal nonprogrammable thermostat at power-up, indicated with Hold appearing in the display. Pressing the Prog key once enters the programming mode. The thermostat is preset with a factory set schedule for 7 days, see Table 1.
Thermostat Reset your equipment response time, to give the equipment time to adjust the temperature before you get up. The T4700 can be reset to its default settings (Table 1) by inserting a bent paper clip or similar wire into the small hole on the front of the thermostat (next to to the (+) key with the cover open). This resets only the clock; the programmed schedule is retained. LEAVE is the time you can set for an energy-saving temperature while you are away at work or school.
Table 2. Setting the Current Day and Time. Step Press This Key Display Shows Description 1 Displays day of the week. 2 Displays changed day of the week. 3 Displays hour of the day. 4 Displays changed hour of the day. 5 Displays minute of the day. 6 Displays changed minute of the day.
Table 3. Setting the Daily Schedule (7-Days). Step Press This Key Display Shows Description 1 Scrolling through the display shows the first day to program, beginning with Monday. 2 Displays WAKE time. 3 Displays changed WAKE time in ten-minute increments. 4 Displays WAKE setpoint temperature. 5 Displays changed WAKE setpoint temperature. 6 Displays LEAVE time. NOTE: Continue through LEAVE, RETURN, and SLEEP periods using the same procedure to set the time and temperature for each period.
Table 4. Copying Schedules to Another Day. Step Press This Key Display Shows Description 1 Selects and displays the day to be copied; for example, MOnday. 2 Displays COPY FROM day (MOnday). 3 Displays COPY TO day (TUesday). 4 Enters the program. (NOTE: Repeat sequence to copy additional days.
Table 5. Overriding a Program. Step Press This Key Display Shows Description Temporarily Overriding a Program Temporary (TEMP) Mode Changes to TEMPorary mode and controls at a new temperature until the next scheduled event (for example, RETURN). Indefinitely Overriding a Program Hold (HOLD) Mode Changes to HOLD mode and controls at the HOLD temperature indefinitely. Increases or decreases the HOLD temperature. Changes from the HOLD mode to the RUN mode.
Table 6. Programming Additional Functions. Function Press This Key Display Shows Description Begin sequence to convert display or mode. Press and hold both the Prog and Func keys. Initially a random fourdigit/letter display occurs (for example, FF FF). Continue to press Prog key until temperature symbol appears. Convert to °C or °F. Press Prog key a second time to display °C. Use (+) key to change to °F if desired (or °F to C°). Convert 5-1-1 to 7 day. Press Prog key a third time to display 511d.
Checkout 1. After initial thermostat powerup (or after eight hours of continuous power loss), the display blinks for two seconds, then runs a self-test (when 00E displays) for 15 seconds. When the internal self-test checkout is complete, the display flashes (1:00 PM) and the thermostat is ready to be programmed. 2. 3. Press the (+) key until the setpoint displayed exceeds the room temperature to verify that the thermostat is turning on the baseboard heater.
Customer Assistance Please direct any questions about the operation of this thermostat to Honeywell Customer Assistance at 1-800-468-1502, Monday-Friday, 7:00 a.m. - 5:30 p.m. Central time.
Limited One-Year Warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If, at any time during the warranty period, the product is defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option) within a reasonable period of time.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 69-1396—2 G.H. Rev. 1-03 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Scarborough, Ontario M1V 4Z9 Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. www.honeywell.