Submittal Sheet

SPECIFICATIONS
The specications following are nominal and conform to generally
accepted industry standards. Honeywell is not responsible for
damages resulting from misapplication or misuse of its products or
non-workmanlike installation practices.
Operating Ambient:
32 to 150°F [0 to +65°C].
5-95% RH (non-condensing)
Fluid temperatures:
34 to 203°F [1 to 95°C]
Shipping and Storage Temperature:
-40 to 150°F [-40 to +65°C]
Atmosphere:
Non-corrosive, non-explosive.
Valve Materials:
Body of bronze Cartridge of Ryton (polyphenylene sulphide)
and Noryl (polyphenylene oxide)
O-ring seals of EPDM rubber
Stem of stainless steel
Pressure Rating:
Static - 300 psig [20 Bar] maximum.
Burst - 1500 psig [100 Bar]
Operating Differential and Close-off - 60 psi maximum [4 bar]
Stem Travel:
0.4 inches [10 mm]
Flow Characteristics: Linear or equal percentage, per Table 2.
Spring Force:
1000 and 6000 Series(Silver): 14 lbf.
3000 and 7000 Series(Red): 20 lbf.
Form No. 95C-10948
VCZA,B,M,N Series
Cartridge Valve for Use with VC Series
Figure 1 - Nominal dimensions in inches [millimetres]
Table 1: VC Valve assembled dimensions
2007.05 Printed in Canada
A
B
B
AB
A
94 [3-3/4]
D
90 [3-9/16]
C
94 [3-3/4]
C
68 [2-3/4]
E
The VC hydronic valve consists of a valve body and replaceable
characterized cartridge assembly.
Depending on the valve model selected, they can be used with a
VC2114 or VC8114 series actuator to provide on-off ow control, or
with a VC6930 or VC7930 series actuator to provide proportional ow
control. Two way bodies may be plumbed in either direction. Three-way
bodies may be used in either diverting or mixing applications.
Replacing the cartridge rebuilds the valve. The valve body should be
able to stay in the pipes indenitely.
VC actuators, ordered separately, use cam-operated cartridge travel to
resist water hammer. Limit switches prevent motor overrun.
[1] Dimensio
n
Pipe Fitting Sizes mm Inches mm Inches mm Inches
1/2" SWEAT 89
3-1/2 130 5-1/8
1/2" NPT (int.)
98 3-7/8 136 5-11/32
3/4" NPT (int.)
130
5-1/8
3/4" SWEAT 132 5-3/16
1" NPT (int.)
1" SWEAT 5-11/32
1-1/4" SWEAT
1-1/4" NPT (int.)
[1] All models not available in all countries
111 4-3/8
142 5-5/8
113 4-7/16
136
118
EC D
110 4-5/16 4-5/8
3-11/1694