Christmas Tree Manual

OPEN
OPEN
USER SERVICING INSTRUCTIONS (CONTINUED)
5. Close fuse cover. Slide closed the fuse access cover
3. Remove fuse carefully.
4. Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse (provided with product).
safety device (fuse) that should not be removed. Discard
6. Risk of fire. Do not replace attachment plug. Contains a
B) Replace the fuse of the power cord from the bottom section ( C) and plug 2:
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug
5. Close fuse cover. Slide closed the fuse access cover
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards
3. Remove fuse carefully.
4. Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse
that should not be removed. Discard product if the attachment plug is damaged.
6. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
on top of attachment plug.
product if the attachment plug is damaged.
by pulling on cord.
blades.
(provided with product).
on top of attachment plug.
T
S
-
7
7
3A . M AX
USE ONLYUSE ONLY
125V FUSE
OPEN
Replace the lamp:
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug
2. Unlock the burned out LED lamp by lifting the hook.
4. Replace lamp with only 3.0 Volt, 0.06 Watt, LED type lamp (provided with
5. Lock the hook of lamp base by pushing lock down into the tab.
3. Pull lamp and plastic base straight out of lampholder.
product). Always match the hook to the tab.
CAUTION:
1. To reduce the risk of overheating, replace burned-out lamps promptly. Use 3.0
The LED lamp has polarity. Do not deliberatelyVolt, 0.06 Watt LED lamps only.
change the direction of the LED lamp in the lamp holder.
product2. Risk of fire. This product does not contain lamp shunts, which allow the
to operate if one lamp burns out. Replace lamps only with the spare lamps
Hook
Tab
Unlock
Lock
by pulling on cord.
provided with this product.
EN 6