- Hewlett-Packard Switch User Manual

Setting Up Security for a Device
Port Security (hubs only)
Note: In order for traps to function, you must also set the trap in the
Thresholds dialog box, as follows:
1. Using the right mouse button, click on the device symbol in the HP
Network Node Manager map.
2. Select
SNMP Configuration
.
3. Select the Thresholds tab and set the thresholds for the traps you are
interested in receiving.
4. Select the Trap Receivers tab and set the management stations that can
capture traps.
5. Select the Authorized Managers tab and set the management stations that
can send and receive SNMP requests for the device.
Figure 8-3. Set Trap Receiver Thresholds
Disable Port
If the Disable Port parameter displays “yes”, the port may be disabled when
an unrecognized address is received. Disabling the port depends on the
Address Selection parameter that you have chosen. The settings First Heard
and Assigned will disable the port if a new address is heard on that port. The
Setting Up Security for a
Device
8-6