Installation Sheet

ASSEMBLY INSTRUCTION
Item#: 366-50-106 Waverly Shaped Hall Console
***
Caution: Please read all instructions carefully before starting the assembly process.
NO
Hardware List
Q'ty
Plastic Anchors
2
2
Hook
B
A
Assembly Steps:
1. Drill two holes into the wall using 1/4”drill bit at the desired place you want to set the chest and insert
the Plastic Anchors (B).
2. Screw the Hook (A) into the Plastic Anchor (B) .Check and make sure the Plastic Anchor(B) is
securely held in the wall.
3. Hang the metal rings on to the Hook (A) and set the chest in the angle you want.
Above hardware is packed in the plastic bag with the instruction sheet.
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp
cloth. Polish the finish with soft cloth and an industry recognized furniture polish.