Specification Sheet

1/2

ASSEMBLY INSTRUCTION

(for connecting the wire of the light on this cabinet)

Item# 5960-75906-MULTI Sattler Display Cabinet

*** Caution: Please read all instructions carefully before starting the assembly process.

Please note this cabinet can be used alone with can light on by a touch dimmer. Also,

when two or more are bunched together, you can control all can lights by touching one

dimmer.

Assembly Steps:

1. When each piece of cabinet is used alone, attach male connector of the power switch (A) to a

wall plug. (See Diagram 1)

Diagram 1

Diagram 2

PAGE 1
ASSEMBLY INSTRUCTION (for connecting the wire of the light on this cabinet) Item# 5960-75906-MULTI Sattler Display Cabinet *** Caution: Please read all instructions carefully before starting the assembly process. Please note this cabinet can be used alone with can light on by a touch dimmer. Also, when two or more are bunched together, you can control all can lights by touching one dimmer. Diagram 1 Diagram 2 Assembly Steps: 1.
PAGE 2
. Touch dimmer is at the inside of right post. 3. If you want to bunch two or more cabinets together, place them all side by side in a desired location. 4. Leave male connector of the can light (C) and female connector of power switch (B) for the first cabinet (#1) as it is. Keep male connector of the can light (C) and female connector of power switch (B) off for the rest cabinets (#2, #3, and so on). (See Diagram 2) 5.