Installation & Assembly

ASSEMBLY INSTRUCTION

Item#:5751-75200T-95 84in Rectangular Dining Table Top w-2/22in

5751-75200B-95 Rectangular Dining Table Base

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Diagram 1 Diagram 2 Diagram 3

Note:

1. Height of this table can be adjusted with or without extension block. (30” and 36” heights)

1/3

PAGE 1
ASSEMBLY INSTRUCTION Item#:5751-75200T-95 84in Rectangular Dining Table Top w-2/22in 5751-75200B-95 Rectangular Dining Table Base ** Please make sure you have all parts indicated below prior to assembly. This table is heavy and can best be assembled with the help of two or more people. Diagram 1 Diagram 2 Diagram 3 Note: 1. Height of this table can be adjusted with or without extension block.
PAGE 2
Assembly steps with extension blocks: 1. Well place 2pcs of top stretchers between side frames (H), using bolts (F), lock washers (C) and flat washers (D), don’t tighten up at this step. (See Diagram 1).Then place bottom stretcher between pedestals (H), using bolts (G), lock washers (C) and flat washers (D), secure all by turning with allen wrench (A) in clockwise direction. (See Diagram 1). 2. Attach the extension blocks(L) to the side frames.
PAGE 3
Instruction for table leaves: 1. There are latches at the bottom of table top, turn off the latches as shown in Diagram 7. 2. Pull out table top as the arrow direction shown in Diagram 8. 3. Place table leaves between and push table tops together. 4. Turn on latches. (see Diagram 7) 5.Take opposite actions to remove table leaves. Diagram 7 Diagram 8 Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.