Installation Instructions

18
Tips for Water dispenser
The refrigerator includes a water dispenser which
makes it easier to fill your cup of water and have
access to cold water almost immediately. The
water dispenser includes one tank of 2.0 litres of
water which has to be filled out. To use water
dispenser follow the instructions below:
1. Open the refrigerator door to take out the water
tank from the door.
2.Open the filter cover of the water tank, slowly fill
the water tank to prevent any spills until the tank
is filled. Then close the filler cover of the water
tank. Then put back the tank at the original place.
See below picture
3. Once the water tank is full, set the
thermostat at the lowest mode or the Fast
Cool mode, and one hour later you can
dispense water for drinking. See image below
picture. Please restore to the original
temperature setting after use.
1. Make sure that the refrigerator is
unplugged, pry the hinge cover up and
off , remove four screws that secure the
u pper hinge to the door and remove the
hinge, then remove the fridge door.
2. Re move two screws that secure the
center h inge.