Instructions / Assembly
7
www.homewerksww.com
ASSEMBLY INSTRUCTIONS
6
7
10
6. Check damper to see that it opens freely.
Tape all connections to make them secure and air tight.
CONNECT WIRING
7. Wire fan following diagram on page 5. Route electrical cable
directly to unit. Cable should not touch sides or top of housing
after installing.
CAUTION: If your electrical wires do not match the colors listed,
you must determine what each house wire represents before
connecting. You may need to consult an electrical contractor to
determine safely.
ATTACH GRILLE AND LIGHT
8. Plug light into WHITE receptacle.
Slide light reector into front of grille opening.
9. Install light reector into fan body by using one machine screw.
Install 13 watt, GU24 bulb (included).
10. Insert light reector.
8
9